Instrument High Level Disinfectants

One bottle will neutralize 1 gallon Glute-Out Neutralizer offers a solution to dangerous disinfectant disposal problems Glute-Out deactivates glutaraldehydes and OPA by using a glycine powder base that neutralizes solutions in just five minutes Meets California EPA requirements and has been proven an environmentally...

No dilution required Recommended for immersible and heat-sensitive equipment and instruments Contains a surfactant Reusable for up to 28 days

This is a solution recommended for the sterilization and High Level disinfection of heat-sensitive, immersible medical and dental equipment and instruments This glutaraldehyde is not recommended for use on scopes or any instrument with a lens because of the risk of film development Contains...

Contains a surfactant No dilution required Recommended for heat-sensitive equipment and instruments

No dilution required Recommended for immersible and heat-sensitive equipment and instruments Contains a surfactant Reusable for up to 28 days Bottle contains 1 quart of sterilizing and disinfecting solution.

Quickly determines if the minimum effective concentration (MEC) of 1.8% glutaraldehyde is present during the 28-day use life of MetriCide28 and MetriCide Plus 30 Easy to use monitoring system for users of High Level disinfecting and sterilizing solutions

High level disinfectant for use in both manual soaking and automated endoscope reprocessors Quick 8 minute contact time at 20°C / 68°F Reusable for up to 21 days Requires no extra ventilation under normal use conditions Formulated with biodegradable ingredients

Monitoring system for users of high level disinfecting and sterilizing solutions Quickly determines if the minimum effective concentration (MEC) of 1.5% glutaraldehyde is present during the 14-day use life of MetriCide

Monitoring system for users of high level disinfecting and sterilizing solutions Quickly determines if the minimum effective concentration (MEC) of 1.5% glutaraldehyde is present during the 14-day use life of MetriCide

Test strips for Rapicide OPA feature a large, easy to read indicator pad. Color chart on bottle provides a pass/fail reference. 3-second dip time with 90-second read time

To verify the efficacy of McKesson OPA/28 Solution, user should test for the minimum effective concentration (MEC) prior to each use 3 second dip time, read at 90 seconds Large, easy-to-read indicator pad Definitive color identification comparison chart on each bottle 18-month shelf life...

High level disinfectant for use in both manual soaking and automated endoscope reprocessors Quick 8 minute contact time at 20°C / 68°F Reusable for up to 21 days Requires no extra ventilation under normal use conditions Formulated with biodegradable ingredients

Does not contain the suspected carcinogen ortho-phenyl phenol Requires no activator, saving you time and eliminating mixing errors At a pH of about 6.3, it is very stable and noncorrosive Using the EPA-approved quantitative method, WAVICIDE-01 kills M. Tuberculosis in 45 minutes at room...

At full strength for a maximum of 28 days at 25°C with an immersion time of at least 90 minutes REGIMEN Glutaraldehyde Solution is used for High Level disinfection, or as an alternative method of sterilization when other chemical sterilants are not sufficient. It...

To verify the efficacy of McKesson OPA/28 Solution, user should test for the minimum effective concentration (MEC) prior to each use 3 second dip time, read at 90 seconds Large, easy-to-read indicator pad Definitive color identification comparison chart on each bottle 18-month shelf life...

There are 60 sterilization chemical indicator strips in a bottle.