Pipettes and Pipettors

McKesson transfer pipettes are one-piece and nonsterile: They are produced from a low density polyethylene which will not shatter or break 5 mL volume with 3.4 draw volume Nonsterile

160-millimeter pipette has 7 mL capacity with 0.5 mL graduations up to 3 mL. 3.2 mL bulb draw with 20 drops/mL Stem diameter is 7.9 millimeters; tip diameter is 3 millimeters. Made from a custom grade of low-density polyethylene (LDPE), these unbreakable one-piece pipettes...

Made from a custom grade of low-density polyethylene (LDPE), these unbreakable one-piece pipettes are used to draw and dispense liquids in controlled, reproducible drop sizes. Narrow stem is 2.5 millimeters in diameter; tip diameter is 2.5 millimeters. Total volume is 1.2 mL; bulb draw...

High accuracy and precision guaranteed Streamlined tip ejector designed for access to narrow necked containers and tubes Autoclavable tip cone and lower section assembly Ergonomic, lightweight and soft plunger movement Two step plunger operation allows you to use reverse pipetting technique during

Serological pipettes are designed for accurate and rapid fluid dispensing; they can be used for mixing chemical solutions, mixing cell suspension, transferring liquids and measuring liquids. McKesson polystyrene serological pipettes fit into most pipette controllers and allow for fast volumetric measurements. Calibration is certified...

116-millimeter-long bulb-draw transfer pipette is made of low density polyethylene (LDPE) and has a volume of 1.5 mL. Nonsterile transfer pipette is graduated in 0.1 mL increments to 0.3 mL. Bulb draw is 0.9 mL; drops/mL are 21. Stem diameter is 3.2 millimeters; tip...

These Pasteur-type pipettes are intended for one-time use in the transfer of small volumes

Transfer pipette has a large bulb size that accommodates a 3.4 mL draw volume; tip diameter is 2.7 millimeters – allowing for 25 drops per mL. It's graduated in 0.25 mL increments. Stem is 4.8 millimeters; total length is 150 millimeters.

McKesson transfer pipettes are one-piece and nonsterile: They are produced from a low density polyethylene which will not shatter or break 5 mL volume with 3.4 draw volume Nonsterile

3 mL pipette with 0.25 mL graduations up to 1 mL Small bulb has a bulb draw of 2.2 mL. Total length is 140 millimeters. Stem diameter is 4.4 millimeters; tip diameter is 2.4 millimeters. Made from a custom grade of low-density polyethylene (LDPE),...

Liquids do not stick to these McKesson 7.5 mL nonsterile transfer pipettes. The pipettes can easily access large bottles or long-necked containers thanks to their long stems . The 3-mL draw volume capacity allows you to suck large volumes of thick liquid at one...

5 mL pipette with 0.25 mL graduations up to 1 mL Large bulb has 3.4 mL draw volume; 24 drops per mL. Total length is 145 millimeters. Stem diameter is 4.8 millimeters; tip diameter is 2.7 millimeters. Made from a custom grade of low-density...

3 mL pipette with 0.25 mL graduations up to 1 mL Small bulb has a bulb draw of 2.2 mL. Total length is 140 millimeters. Stem diameter is 4.4 millimeters; tip diameter is 2.4 millimeters. Made from a custom grade of low-density polyethylene (LDPE),...

High accuracy and precision guaranteed Streamlined tip ejector designed for access to narrow necked containers and tubes Autoclavable tip cone and lower section assembly Ergonomic, lightweight and soft plunger movement Two step plunger operation allows you to use reverse pipetting technique during

Large bulb pipette tips have a 15 mL capacity; a bulb draw of 8 mL with 19 drops per mL. Total length is 155 millimeters; stem and tip diameters are 3 millimeters.